Item No. 001

SRS ASSIST RESISTANCE EMULATOR PLUS

SRS ASSIST helps with diagnostics on airbag systems, if you don't know the resistance you need to bypass a part.

A MUST HAVE for all Garages & Auto electricians worldwide.

We designed & built this item, as there was nothing like it on the market.

Developed to assist you in SRS / AIRBAG diagnostics.
SRS ASSIST Plus will save you time and money, every time you use it.

You are purchasing
1 x SRS ASSIST RESISTANCE EMULATOR PLUS ONLY

MULTIPLE ITEMS IN PICTURES ARE FOR INFO ONLY (Fluke multimeter not included)

These units are hand made, NOT mass produced, thus we check every step of the assembly process. Every unit is unique (appearance may differ slightly from pictures).

SUGGESTIONS FOR USE

ASSIST

SRS ASSIST will help you with diagnostics on airbag systems, if you don't know the resistance you need to bypass a part, helps to test the airbag system is working before purchasing & replacing the faulty part/s.

Also with fault finding on SRS / Airbag systems.
SRS, when used correctly, you will be able to simulate resistances of the faulty SRS / Airbag devices as listed below.

Note some Vehicle makes, when accessing SRS / AIRBAG live data on a diagnostic scanner, may not display the resistances of the SRS devices.

NOTE: if you have more than one faulty srs / airbag device, then you will have to work through them one at a time.
You will be able to simulate resistances of faulty airbag system parts, such as:-

DRIVERS AIRBAG
PASSENGER AIRBAG
SIDE AIRBAG
CURTAIN AIRBAG
KNEE AIRBAG
PELVIS AIRBAG
PEDESTRIAN AIRBAG
SEAT BELT PRETENSIONERS
BELT BUCKLE PRETENSIONERS
ANY SRS SYSTEM COMPONENT WITH AN INFLATOR

PLUS

When reading live ohms data with diagnostic equipment, you can simulate a resistance of the device that’s suspect.
You can change the resistance of the suspect device and watch the live data on a diagnostic scanner change
(Meaning the wiring and data sent to ecu is ok).

You can also simulate a short circuit, no need to disconnect srs assist emulator, just turn the knob to “0” ohms

We have designed srs assist ohms selector knob to rotate continuously, clockwise or anticlockwise this way you can select
any resistance easier.

The SRS ASSIST was designed originally for srs / airbag diagnostics but has also proven very useful in other fault finding
procedures.

SRS ASSIST has 11 different resistances plus "0" ohms that can be selected by turning the selector knob.

THEY ARE:

0.0 OHMS - 1.0 OHMS - 1.5 OHMS -   1.8 OHMS - 2.2 OHMS - 2.7 OHMS
3.0 OHMS - 3.3 OHMS - 3.9 OHMS -   4.7 OHMS - 5.6 OHMS - 6.8 OHMS

SPECIFICATIONS:

All resistances are .25 watt ¼ watt +/- 3% tolerance & 2 amps fused
Dimensions s approximately 75mm x 48mm x 27 mm + 13mm knob
Case material plastic
Flexible test leads approximately 200mm Inc exit grommet & pins.

NOTE:

If the yellow pin wires are lengthened then the resistance tolerance will change, please remember this if you decide to check
the srs assist unit using a good quality ohms meter, make sure your meter ZERO's, do not use the meter probe leads, just plug
in the 2 leads directly from the srs assist unit into your ohms meter as the leads on your meter have a resistance,
this means you will not read the srs assist units true readings.

SAFETY:

SRS ASSISIT has NO BATTERY or power source, this means you never have a flat battery during use, also it will be impossible
for this unit to cause any damage by sending power to an ecu or other part during diagnosis.
SRS ASSIST has a 2 amp fuse that is easily accessed, just in case power is sent to it, this will prevent damage to srs assist.

PRECAUTIONS:

Never make any measurement directly on air bag module(s) or seat belt tensioners. A fault in these components is determined by a process of elimination using Resistance Emulator.

To avoid accidental air bag deployment when trouble shooting SRS, DO NOT use self-powered electrical test equipment, such as battery-powered or AC-powered voltmeter, ohmmeter, etc. when air bag module(s) or seat belt tensioners are connecter to the SRS.

CONDITIONS OF SALE

ARE THAT YOU UNDERSTAND WHAT SRS ASSIST RESISTANCE EMULATOR PLUS CAN BE USED FOR & HOW TO USE IT,

NOTE: if you have more than one faulty SRS / Airbag device, then you will have to work through them one at a time
You may have to reset / clear the SRS / Airbag fault codes in the ECU, every time you select a different resistance, unless you're lucky & select the correct resistance first time.
SRS ASSIST will help you choose the correct resistance ONLY. We do not guarantee your Airbag light will go out. (due to other factors i.e. a system that has activated and logged crash damage data in the ECU).
SRS ASSIST is NOT a replacement for any SRS / Airbag part & is NOT a reset tool, it has been designed specifically as a diagnostic aid.

WORKING ON THE AIRBAG SYSTEM IS DANGEROUS AND SHOULD ONLY BE REPAIRED BY QUALIFIED   TECHNICIAN & FOLLOW MANUFACTURERS PROCEDURE.

PLEASE ASK ANY QUESTIONS ABOUT THIS ITEM BEFORE PURCHASING

                            All images are for display purposes only and are copyright srs-assist 2016 ©